Deutsch

Installation instructions for stickers

Solid-colored stickers

Stickers made from solid-colored vehicle labeling film are manufactured for immediate installation.

  1. Only perform the installation at temperatures above 10 °C (50 °F).
  2. Clean the area that the sticker will be applied to from grease and dirt.
    ATTENTION: A lotus effect coating of windows and painted surfaces strongly reduces the adhesive power of the sticker. If the car has a lotus effect coating, the area must be cleaned with isopropyl alcohol (IPA) or silicone remover first.
    HINT: The sticker should not be placed in the wiping area of the windscreen wiper.
  3. The sticker will be delivered on a background paper and is covered by a transparent transfer film. Pull off the background paper carefully. Make sure that the motif remains entirely on the transfer film.
    HINT: If the sticker does not properly come off the background paper (e. g. after lying for a long time), place it on plain surface and strongly press with a flat, blunt item (e. g. old credit card) then try to peel it off the background paper again.
  4. Align the sticker and adhere it with the transfer film to desired place.
  5. Apply pressure to the transfer plastic film with a flat, blunt item (e. g. old credit card) or with your flat hand.
  6. Peel off the transparent transfer film carefully.
  7. Done. The sticker is washing bay proof after about three to five days.

Multi-colored stickers

  1. Only perform the installation at temperatures above 10 °C (50 °F).
  2. Clean the area that the sticker will be applied to from grease and dirt.
    ATTENTION: A lotus effect coating of windows and painted surfaces strongly reduces the adhesive power of the sticker. If the car has a lotus effect coating, the area must be cleaned with isopropyl alcohol (IPA) or silicone remover first.
    HINT: The sticker should not be placed in the wiping area of the windscreen wiper.
  3. Remove the sticker from the background paper.
  4. Align the sticker and adhere it to the desired place.
  5. Done. The sticker is washing bay proof after about three to five days.

Sticker removal

The stickers can be removed without residue at warm temperatures. For a better removal, you may heat up the sticker with a hair blower.